Seamaster Paint Protective Coating

-Seamaster protective coatings are widely used for special areas such as industrial, oil, gas & chemical, marine, infrastructure, storage tanks, concrete floors, bridgesand traffic roads.

-Seamaster protective coatings are manufactured with stringent quality control.

-This product is especially used in the wood furniture industry. However, it may also be used for metal surfaces.

-Gloss : Glossy

USES

As a finish coat of the epoxy system. Suitable for use on steel and cement surfaces where high degree of chemical, oil and abrasion resistance is required.

PHYSICAL CHARACTERISTICS

Ingredient : Polyamide, Epoxy Resin, Inorganic and organic pigments and additives

Solvent : Ketone, ester and  aromatic hydrocarbon

Mixing Ratio : 4:1 (Based : Hardener) 

Density : 1.4-1.5 (kg/litre) for mixed paint

Solid : Approximately 75%

Viscosity : 75 10 KU (mixed paint)  (at 27  0.5˚C)

Coverage : 5-7m²/litre

Gloss : Glossy

Pot Life  : Approximately 8 hour after mixing (room temperature)

PROPERTIES

Recommended Film Thickness : 50 - 80 microns per coat

Drying Time  : Touch Dry : 2 hours 

                        Hard Dry : 6 hours

Curing Time  : Normal Service    : 4 days

                        Heavy Abrasion Service  : 7 days

Recoating Interval : 2hours

SURFACE PREPARATION

Steel Surface:

The mild steel substrate must be completely dry and free from rust, mill scale, dirt, grease an other contaminants before painting. For mazimum adhesion and durability of paint performance all bare metals should be sanded properly.

Wood Surface:

The woodwork must be dry and free from dirt and other contaminants. Smoothen the surface by sanding and dust off before applying.

Aluminium Surface:

Remove oils, grease and dirt by using solvent or other cleaning chemicals.

Concrete Surface:

Remove all previous coating and chalk by lligth abrasive blasting.

Free RM 10 voucher for every RM200 purchase . Fast response