No delivery service during MCO

Official Kingston KVR16S11/2 2GB DDR3 1600Mhz Laptop Memory Ram (T12-12-12)


RM88.15

Brand: Kingston
SKU: Official Kingston KVR16S11/2
Item left 4

Sold By BLSHOP
Warranty N/A

Weight 0.40 Kg
Shipping
Gvado Standard DeliveryStandard Delivery


logoONLY release payment to the merchants after the items were received by the buyers.

Share

BLSHOP

VISIT SHOP

Products

1772

Ratings

ASK SELLER

Price Drop Notifications

NOTIFY ME


100% Original By Kingston Malaysia & New Stock

Life Time Warranty Local Manufacturer Warranty

FEATURES

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with

starting address “000” only), 4 with tCCD = 4 which does not

allow seamless read or write [either on the fly using A12 or

MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ

pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C,

3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• PCB : Height 1.180” (30.00mm), single sided component


DESCRIPTION

This document describes ValueRAM's 256M x 64-bit (2GB)

DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory

module, based on eight 256M x 8-bit FBGA components. The

SPD is programmed to JEDEC standard latency DDR3-1600

timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold

contact fingers. The electrical and mechanical specifications

are as follows:


YOU MAY ALSO LIKE

FROM THE SAME STORE