logo

Official Kingston KVR1333D3N9/8G 8GB DDR3 1333Mhz Desktop Memory Ram (T12-11-4)


RM267.65

Brand: Kingston
SKU: Official Kingston KVR1333D3N9/8G 8GB DDR3 1333Mhz
Item left 1

Sold By BLSHOP
Warranty N/A

Weight 0.30 Kg
Shipping
Gvado Standard DeliveryStandard Delivery


Share

BLSHOP

VISIT SHOP

Products

1802

Ratings

ASK SELLER

Price Drop Notifications

NOTIFY ME


100% Original By Kingston  Malaysia & New Stock

Life Time Warranty Local Manufacturer Warranty

FEATURES

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 667MHz fCK for 1333Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with

starting address “000” only), 4 with tCCD = 4 which does not

allow seamless read or write [either on the fly using A12 or

MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ

pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C,

3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)


DESCRIPTION

This document describes ValueRAM's 1G x 64-bit (8GB)

DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, memory

module, based on sixteen 512M x 8-bit FBGA components. The

SPD is programmed to JEDEC standard latency DDR3-1333

timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact

fingers. The electrical and mechanical specifications are as

follows:


YOU MAY ALSO LIKE

FROM THE SAME STORE